dmesg - i3-3220 openssl
microcode: microcode updated early to revision 0x1c, date = 2015-02-26
Linux version 4.10.0-041000-generic (kernel@gloin) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #201702191831 SMP Sun Feb 19 23:33:19 UTC 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd82afff] usable
BIOS-e820: [mem 0x00000000dd82b000-0x00000000dda2bfff] reserved
BIOS-e820: [mem 0x00000000dda2c000-0x00000000dda3cfff] ACPI data
BIOS-e820: [mem 0x00000000dda3d000-0x00000000ddb5efff] ACPI NVS
BIOS-e820: [mem 0x00000000ddb5f000-0x00000000de75ffff] reserved
BIOS-e820: [mem 0x00000000de760000-0x00000000de7eefff] type 20
BIOS-e820: [mem 0x00000000de7ef000-0x00000000de7effff] usable
BIOS-e820: [mem 0x00000000de7f0000-0x00000000de832fff] ACPI NVS
BIOS-e820: [mem 0x00000000de833000-0x00000000dec6cfff] usable
BIOS-e820: [mem 0x00000000dec6d000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xdda2f000 ACPI 2.0=0xdda2f000 SMBIOS=0xf04c0 MPS=0xfd490
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P8Z77-M, BIOS 2203 12/18/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FF0000000 write-back
2 base 410000000 mask FF8000000 write-back
3 base 418000000 mask FFC000000 write-back
4 base 41C000000 mask FFE000000 write-back
5 base 41E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff905dc00fd7e0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff905dc0097000] 97000 size 24576
BRK [0xba027000, 0xba027fff] PGTABLE
BRK [0xba028000, 0xba028fff] PGTABLE
BRK [0xba029000, 0xba029fff] PGTABLE
BRK [0xba02a000, 0xba02afff] PGTABLE
BRK [0xba02b000, 0xba02bfff] PGTABLE
BRK [0xba02c000, 0xba02cfff] PGTABLE
BRK [0xba02d000, 0xba02dfff] PGTABLE
BRK [0xba02e000, 0xba02efff] PGTABLE
BRK [0xba02f000, 0xba02ffff] PGTABLE
BRK [0xba030000, 0xba030fff] PGTABLE
BRK [0xba031000, 0xba031fff] PGTABLE
BRK [0xba032000, 0xba032fff] PGTABLE
RAMDISK: [mem 0x33512000-0x35a80fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DDA2F000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DDA2F078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DDA3A6C8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DDA2F180 00B545 (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 0x00000000DDB5D080 000040
ACPI: APIC 0x00000000DDA3A7D8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DDA3A850 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DDA3A898 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DDA3A8D8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DDA3A910 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: BGRT 0x00000000DDA3C120 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DDA3ACD8 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DDA3B688 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
NODE_DATA(0) allocated [mem 0x41efc8000-0x41eff2fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000dd82afff]
node 0: [mem 0x00000000de7ef000-0x00000000de7effff]
node 0: [mem 0x00000000de833000-0x00000000dec6cfff]
node 0: [mem 0x00000000deff4000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
On node 0 totalpages: 4181008
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14130 pages used for memmap
DMA32 zone: 904306 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3272704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd82b000-0xdda2bfff]
PM: Registered nosave memory: [mem 0xdda2c000-0xdda3cfff]
PM: Registered nosave memory: [mem 0xdda3d000-0xddb5efff]
PM: Registered nosave memory: [mem 0xddb5f000-0xde75ffff]
PM: Registered nosave memory: [mem 0xde760000-0xde7eefff]
PM: Registered nosave memory: [mem 0xde7f0000-0xde832fff]
PM: Registered nosave memory: [mem 0xdec6d000-0xdeff3fff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9061dec00000 s107800 r8192 d31464 u524288
pcpu-alloc: s107800 r8192 d31464 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4115651
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16123696K/16724032K available (8936K kernel code, 1660K rwdata, 3852K rodata, 2228K init, 2364K bss, 600336K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:456 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3299.859 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6599.71 BogoMIPS (lpj=13199436)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 33919 entries in 133 pages
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (26402.23 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdda3d000-0xddb5efff] (1187840 bytes)
PM: Registering ACPI NVS region [mem 0xde7f0000-0xde832fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 12:38:07, date: 05/01/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9061CC171000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9061CC1FD000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9061CC219C00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf6100000-0xf610ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf6116000-0xf611600f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf6114000-0xf61143ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf6113000-0xf61133ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf6112000-0xf61127ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf6111000-0xf61110ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1288] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf6080000-0xf6083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:02:00.0: [14f1:8852] type 00 class 0x040000
pci 0000:02:00.0: reg 0x10: [mem 0xf6200000-0xf63fffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xf6200000-0xf63fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xea104000-0xea104fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xea100000-0xea103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xea100000-0xea1fffff 64bit pref]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xf0000000-0xf41fffff]
pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci 0000:05:00.0: [1102:0005] type 00 class 0x040100
pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc01f]
pci 0000:05:00.0: reg 0x14: [mem 0xf4000000-0xf41fffff 64bit]
pci 0000:05:00.0: reg 0x1c: [mem 0xf0000000-0xf3ffffff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:04:00.0: bridge window [mem 0xf0000000-0xf41fffff]
pci 0000:04:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xf0000000-0xf41fffff] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd82b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde7f0000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdec6d000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xea200000-0xea200fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xf6200000-0xf63fffff]
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xea100000-0xea1fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:04:00.0: bridge window [mem 0xf0000000-0xf41fffff]
pci 0000:00:1c.6: PCI bridge to [bus 04-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xf0000000-0xf41fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xf6200000-0xf63fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xea100000-0xea1fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf41fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf41fffff]
pci_bus 0000:05: resource 4 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 5 [mem 0xf0000000-0xf41fffff]
pci_bus 0000:05: resource 6 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 9 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:05: resource 10 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:05: resource 11 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:05: resource 12 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 38332K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcc601000-0xd0601000] (64MB) mapped at [ffff905e8c601000-ffff905e90600fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1493642287.912:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Allocating IMA blacklist keyring.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0xe9000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6114000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-041000-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6113000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-041000-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-041000-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.0-041000-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x306a9, pf=0x2, revision=0x1c
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 15395107a50a2e7362d75949548d6307a7d9c9f7'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 1:919:631
rtc_cmos 00:02: setting system clock to 2017-05-01 12:38:08 UTC (1493642288)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1288K
Freeing unused kernel memory: 244K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:1f.2: version 3.0
r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffa4e5818c1000, 50:46:5d:05:61:ed, XID 08000800 IRQ 26
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
r8169 0000:03:00.0 enp3s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf6112000 port 0xf6112100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xf6112000 port 0xf6112180 irq 27
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf6112000 port 0xf6112280 irq 27
ata5: SATA max UDMA/133 abar m2048@0xf6112000 port 0xf6112300 irq 27
ata6: SATA max UDMA/133 abar m2048@0xf6112000 port 0xf6112380 irq 27
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff9061ce0c6208), AE_NOT_FOUND (20160930/psparse-543)
ata6.00: ATA-9: WDC WD30EZRX-00DC0B0, 80.00A80, max UDMA/133
ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff9061ce0c6140), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff9061ce0c6aa0), AE_NOT_FOUND (20160930/psparse-543)
ata2.00: NCQ Send/Recv Log not supported
ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff9061ce0c6708), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff9061ce0c6208), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff9061ce0c6140), AE_NOT_FOUND (20160930/psparse-543)
ata4.00: ATA-9: ST8000AS0002-1NA17Z, AR13, max UDMA/133
ata4.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
ata2.00: NCQ Send/Recv Log not supported
ata2.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff9061ce0c6aa0), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff9061ce0c6708), AE_NOT_FOUND (20160930/psparse-543)
ata4.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HDS5C302 A580 PQ: 0 ANSI: 5
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff9061ce0c6eb0), AE_NOT_FOUND (20160930/psparse-543)
ata5.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff9061ce0c6eb0), AE_NOT_FOUND (20160930/psparse-543)
ata5.00: configured for UDMA/133
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 3:0:0:0: Direct-Access ATA ST8000AS0002-1NA AR13 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
sdb: sdb1 sdb2
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA WDC WD30EZRX-00M 0A80 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 4:0:0:0: [sdd] 4096-byte physical blocks
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 5:0:0:0: [sde] 4096-byte physical blocks
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 4:0:0:0: [sdd] Attached SCSI disk
sde: sde1
sd 5:0:0:0: [sde] Attached SCSI disk
usb 1-1.1: new low-speed USB device number 3 using ehci-pci
random: fast init done
usb 2-1.7: new full-speed USB device number 3 using ehci-pci
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 3000457035776
usb 1-1.1: New USB device found, idVendor=0603, idProduct=00f2
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: USB Keyboard
usb 1-1.1: Manufacturer: NOVATEK
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0603:00F2.0001/input/input2
usb 2-1.7: New USB device found, idVendor=1131, idProduct=1004
usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.7: Product: ISSCBTA
usb 2-1.7: Manufacturer: ISSC
hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1a.0-1.1/input0
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0603:00F2.0002/input/input3
tsc: Refined TSC clocksource calibration: 3300.023 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f91626a655, max_idle_ns: 440795305688 ns
usb 1-1.2: new full-speed USB device number 4 using ehci-pci
hid-generic 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1a.0-1.1/input1
usb 1-1.2: New USB device found, idVendor=22b8, idProduct=003b
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: Motorola NYXboard, 2.4GHz device
usb 1-1.2: Manufacturer: Motorola
usb 1-1.2: SerialNumber: \xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf
input: Motorola Motorola NYXboard, 2.4GHz device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:22B8:003B.0003/input/input4
hid-generic 0003:22B8:003B.0003: input,hidraw2: USB HID v1.11 Keyboard [Motorola Motorola NYXboard, 2.4GHz device] on usb-0000:00:1a.0-1.2/input0
input: Motorola Motorola NYXboard, 2.4GHz device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:22B8:003B.0004/input/input5
hid-generic 0003:22B8:003B.0004: input,hidraw3: USB HID v1.11 Mouse [Motorola Motorola NYXboard, 2.4GHz device] on usb-0000:00:1a.0-1.2/input1
input: Motorola Motorola NYXboard, 2.4GHz device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:22B8:003B.0005/input/input6
hid-generic 0003:22B8:003B.0005: input,hiddev0,hidraw4: USB HID v1.11 Keyboard [Motorola Motorola NYXboard, 2.4GHz device] on usb-0000:00:1a.0-1.2/input2
hid-generic 0003:22B8:003B.0006: hiddev0,hidraw5: USB HID v1.10 Device [Motorola Motorola NYXboard, 2.4GHz device] on usb-0000:00:1a.0-1.2/input3
raid6: sse2x1 gen() 9043 MB/s
raid6: sse2x1 xor() 7141 MB/s
raid6: sse2x2 gen() 11158 MB/s
raid6: sse2x2 xor() 7884 MB/s
raid6: sse2x4 gen() 13165 MB/s
raid6: sse2x4 xor() 9723 MB/s
raid6: using algorithm sse2x4 gen() 13165 MB/s
raid6: .... xor() 9723 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
clocksource: Switched to clocksource tsc
random: crng init done
BTRFS: device fsid aa1de2a7-989c-4d68-92f3-768001c29dca devid 1 transid 422450 /dev/sda1
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
lp: driver loaded but no devices found
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ppdev: user-space parallel port driver
EXT4-fs (sdb2): re-mounted. Opts: discard,errors=remount-ro
systemd-journald[350]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] Initialized
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
nvidia-nvlink: Nvlink Core is being initialized, major device number 244
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 381.09 Thu Mar 30 20:07:40 PDT 2017 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 381.09 Thu Mar 30 17:14:36 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
snd_ctxfi 0000:05:00.0: chip 20K1 model Unknown (1102:0023) is found
snd_ctxfi 0000:05:00.0: enabling device (0100 -> 0103)
media: Linux media interface: v0.10
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
Linux video capture interface: v2.00
cx23885: cx23885 driver version 0.0.4 loaded
cx23885 0000:02:00.0: enabling device (0100 -> 0102)
cx23885: CORE cx23885[0]: subsystem: 4254:9580, board: DVBSky T9580 [card=45,autodetected]
snd_ctxfi 0000:05:00.0: Use xfi-native timer
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: RAPL package 0 domain package locked by BIOS
cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
asus_wmi: Number of fans: 1
Adding 35162108k swap on /dev/sda2. Priority:-1 extents:1 across:35162108k FS
BTRFS info (device sda1): use lzo compression
BTRFS info (device sda1): disk space caching is enabled
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
BTRFS info (device sda1): bdev /dev/sda1 errs: wr 21, rd 6, flush 0, corrupt 0, gen 0
cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
cx23885: cx23885_dvb_register() allocating 1 frontend(s)
cx23885: cx23885[0]: cx23885 based dvb card
i2c i2c-1: Added multiplexed i2c bus 3
ts2020 3-0060: Montage Technology TS2022 successfully identified
dvbdev: DVB: registering new adapter (cx23885[0])
cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Montage Technology M88DS3103)...
cx23885: DVBSky T9580 port 1 MAC address: 00:17:42:54:09:82
cx23885: cx23885_dvb_register() allocating 1 frontend(s)
cx23885: cx23885[0]: cx23885 based dvb card
i2c i2c-0: Added multiplexed i2c bus 4
si2168 0-0064: Silicon Labs Si2168-A30 successfully identified
si2168 0-0064: firmware version: A 3.0.2
si2157 4-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
dvbdev: DVB: registering new adapter (cx23885[0])
cx23885 0000:02:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)...
cx23885: DVBSky T9580 port 2 MAC address: 00:18:42:54:09:83
cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa5
cx23885: cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xf6200000
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
audit: type=1400 audit(1493642297.801:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=1134 comm="apparmor_parser"
audit: type=1400 audit(1493642297.801:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1134 comm="apparmor_parser"
audit: type=1400 audit(1493642297.801:4): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1133 comm="apparmor_parser"
audit: type=1400 audit(1493642297.805:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1131 comm="apparmor_parser"
audit: type=1400 audit(1493642297.805:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1131 comm="apparmor_parser"
audit: type=1400 audit(1493642297.805:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1131 comm="apparmor_parser"
audit: type=1400 audit(1493642297.805:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1131 comm="apparmor_parser"
audit: type=1400 audit(1493642297.805:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=1130 comm="apparmor_parser"
audit: type=1400 audit(1493642297.805:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1130 comm="apparmor_parser"
audit: type=1400 audit(1493642297.805:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=1137 comm="apparmor_parser"
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
device enp3s0 entered promiscuous mode
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3300023640 Hz
vboxdrv: Successfully loaded version 5.1.14 (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
SUPR0GipMap: fGetGipCpu=0xb
vboxdrv: ffffffffc0000020 VMMR0.r0
vboxdrv: ffffffffc0103020 VBoxDDR0.r0
VBoxNetFlt: attached to 'enp3s0' / 50:46:5d:05:61:ed
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
[PF_RING] Welcome to PF_RING 6.7.0 ($Revision: dev:10031cfc1650f3b2e9a22145ae0b379e626e24cb$)
(C) 2004-16 ntop.org
[PF_RING] registered /proc/net/pf_ring/
NET: Registered protocol family 27
[PF_RING] Min # ring slots 4096
[PF_RING] Slot version 16
[PF_RING] Capture TX Yes [RX+TX]
[PF_RING] IP Defragment No
[PF_RING] Initialized correctly
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
vboxdrv: ffffffffc0124020 VBoxEhciR0.r0
ip_tables: (C) 2000-2006 Netfilter Core Team
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-dc6e8b93-4a65-7a27-a73c-b2dc0494831f) @ PCI:0000:01:00.0
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Non-volatile memory driver v1.3
show_signal_msg: 33 callbacks suppressed
kodi.bin[2559]: segfault at 48 ip 0000000000d84b88 sp 00007ffee5e1eb20 error 4 in kodi.bin[400000+24bb000]
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 34
nvidia-modeset: Freed GPU:0 (GPU-dc6e8b93-4a65-7a27-a73c-b2dc0494831f) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-dc6e8b93-4a65-7a27-a73c-b2dc0494831f) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 30
nvidia-modeset: Freed GPU:0 (GPU-dc6e8b93-4a65-7a27-a73c-b2dc0494831f) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-dc6e8b93-4a65-7a27-a73c-b2dc0494831f) @ PCI:0000:01:00.0
usb 1-1.2: USB disconnect, device number 4
usb 1-1.2: new full-speed USB device number 5 using ehci-pci
usb 1-1.2: New USB device found, idVendor=1038, idProduct=1702
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: SteelSeries Rival 100 Gaming Mouse
usb 1-1.2: Manufacturer: SteelSeries
hid-generic 0003:1038:1702.0007: hiddev0,hidraw2: USB HID v1.11 Device [SteelSeries SteelSeries Rival 100 Gaming Mouse] on usb-0000:00:1a.0-1.2/input0
input: SteelSeries SteelSeries Rival 100 Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:1038:1702.0008/input/input10
hid-generic 0003:1038:1702.0008: input,hidraw3: USB HID v1.11 Mouse [SteelSeries SteelSeries Rival 100 Gaming Mouse] on usb-0000:00:1a.0-1.2/input1
vboxnetflt: 66 out of 45308 packets were not sent (directed to host)
nvidia-modeset: Freed GPU:0 (GPU-dc6e8b93-4a65-7a27-a73c-b2dc0494831f) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-dc6e8b93-4a65-7a27-a73c-b2dc0494831f) @ PCI:0000:01:00.0
usb 1-1.2: USB disconnect, device number 5
usb 1-1.2: new full-speed USB device number 6 using ehci-pci
usb 1-1.2: New USB device found, idVendor=22b8, idProduct=003b
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: Motorola NYXboard, 2.4GHz device
usb 1-1.2: Manufacturer: Motorola
usb 1-1.2: SerialNumber: \xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf
input: Motorola Motorola NYXboard, 2.4GHz device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:22B8:003B.0009/input/input11
hid-generic 0003:22B8:003B.0009: input,hidraw2: USB HID v1.11 Keyboard [Motorola Motorola NYXboard, 2.4GHz device] on usb-0000:00:1a.0-1.2/input0
input: Motorola Motorola NYXboard, 2.4GHz device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:22B8:003B.000A/input/input12
hid-generic 0003:22B8:003B.000A: input,hidraw3: USB HID v1.11 Mouse [Motorola Motorola NYXboard, 2.4GHz device] on usb-0000:00:1a.0-1.2/input1
input: Motorola Motorola NYXboard, 2.4GHz device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:22B8:003B.000B/input/input13
hid-generic 0003:22B8:003B.000B: input,hiddev0,hidraw4: USB HID v1.11 Keyboard [Motorola Motorola NYXboard, 2.4GHz device] on usb-0000:00:1a.0-1.2/input2
hid-generic 0003:22B8:003B.000C: hiddev0,hidraw5: USB HID v1.10 Device [Motorola Motorola NYXboard, 2.4GHz device] on usb-0000:00:1a.0-1.2/input3